Ceramic Fiber Millboard
Size: 1.5mm thick X 1400mm

$897.12

2300F 1.5mm thick X 1400mm (55″) X 1400 (55″), (24 sheets/carton)

Due to the fragile nature of the material, we cannot ship ceramic fiber boards by UPS. This item will be shipped only via trucking freight. Please call or email us for a freight rate based on your order quantities.

Please Email sales@ceramicfiberonline.com
or Call Us at (855) 255-8210

Ceramic Fiber Millboard

  • 1.5mm thick X 1400mm (55″) X 1400 (55″)
  • 24 sheets/carton

Ceramic Fiber Millboard Block-19 is a high temperature insulation board, which is made from mineral fiber and organic binder. This board is characteristic of excellent insulation efficiency and good strength for various high temperature applications, such as precipitators, dryers, ducts and breeching, utility boilers, furnaces, kilns, etc. The material is ideal for refractory backup insulation behind insulating firebrick and other refractory linings. There could be smoke generated when the binder in the fiber board is burnt above approximately 500°F but the smoke will disperse soon and once for all. To limit or avoid such smoke generation in initial start-up performance, heat rise should be controlled at about 20°F per minute to allow the binder to dissipate with moderate temperature increase. The ignition loss of binder in the first startup operation will not adversely affect the insulation value. Ceramic Fiber Millboard Block-19 can be used at different service temperatures up to a maximum of 1900°F on the hot surface of the enclosed panel. This board is not to be subjected to direct touch with flame as a hot face refractory material.

Ceramic Fiber Millboard Typical Applications:

Ceramic Fiber Millboard Block-19 mineral wool board can be used to insulate plant equipment such as boilers, furnaces, ovens, ducts, precipitators, tanks and other mechanical equipment operating at continuous service temperatures up to 1900°F.

Due to the fragile nature of the material, we cannot ship ceramic fiber boards by UPS. This item will be shipped only via trucking freight. Please call or email us for a freight rate based on your order quantities.

Please Email sales@ceramicfiberonline.com or Call Us at (855) 255-8210

Ceramic Fiber Millboard


Leave a Reply

Related Products

0 / $0